Rope making machine 4-16 mm


Combined strander and rope layer  
Produces finished rope in any length
Three-strand and four-strand models 
External take-up
For production of rope from natural fibre yarns
For production of rope from synthetic fibres
For production of coiled or loose rope 
Key features:


. Start to finish in one continuous operation
. Produce any rope length
. Set length electronically
. Set production speed electronically

. Two rope lays per revolution
. Two motors with inverter drives
. Lightweight rotating parts
. Low noise level
. Compact, simple, robust design
. Easy to change strand twist

. Highly reliable

. Easy to maintain

. Haul-off system for take-up in cans or


. External take-up

  - on coils

  - on reels

  - on hanks

  - loose in cans or boxes


Rope range  Ø4 - 16 mm
Rope flyer speed 0-Max. 525 rpm, depending on pre-twist factor

Rope lay 

S and Z 

Number of lays per min. 

2 x rope flyer speed 

Lay length 14 - 72 mm. Any length can be set electronically
Pretwist factor 0.4 - 2.6 x rope twist
Pay-off packages

M155/3: 3 x 10, max. Ø250 x 300 mm traverse

M155/4: 4 x 10, max. Ø250 x 300 mm traverse

Take-up capacity


Production capacity

Please see below leaflet for further information





 Download the product leaflet: pdf m155__rope__making.pdf (305.3 KB)

Accepter cookies

By continuing to browse or by clicking "Accept All Cookies" you agree to the storing of first- and third-party cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts. Read Privacy Policy

Copyright © 2012 Roblon A/S. Read Disclaimer notice >